Toshiba Satellite Pro L650 User Manual

Page 67

Advertising
background image

User’s Manual

3-18

Hardware, Utilities and Options

Installing a memory module

To install a memory module, follow the steps as detailed below:
1. Shut down the computer - make sure the Power indicator is off (refer to

the

Turning off the power

section in Chapter 1,

Getting Started

if

required).

2. Remove the AC adaptor and all cables and peripherals connected to

the computer.

3. Close the display panel.
4. Turn the computer upside down and remove the battery pack (refer to

Replacing the battery pack

section in Chapter 6,

Power and Power-Up

Modes

, if required).

5. Loosen the screw securing the memory module cover in place - please

note that this screw is attached to the cover in order to prevent it from

being lost.

Use only memory modules approved by TOSHIBA.

Do not try to install or remove a memory module under the following

conditions.
a. The computer is turned on.
b. The computer was shut down in either Sleep or Hibernation Mode.
c. Wake-up on LAN is enabled.
d. The wireless communication function is on.

Be careful not to let screws or other foreign matter fall into the

computer. It could cause malfunction or electric shock.

Additional memory module is a precision electronic component that

may be fatally damaged by static electricity. Since the human body can

carry static electricity, it is important that you discharge yourself before

touching or installing any additional memory modules. To discharge

your body’s static electricity, simply touch any metal close to you with

bare hands.

Use a point size 0 Phillips screwdriver.

Advertising
This manual is related to the following products: