Toshiba M8365 - Manual (Page 33)

33
Engl
ish
CONTROLS AND FEATURES
When this feature is set to On, you must enter 3D PIN
code for changing display mode.
a
In the 3D menu, press B / b to select 3D Safety
Settings and press OK.
b
Enter your 4-digit 3D PIN code.
c
Press B / b to select 3D Lock.
d
Press
C
/
c
to select On.
When the 3D Timer Lock feature is set to On, neither the
PIN input window nor the 3D start message will be shown
while the 3D Enable timer is active, even if a switch to 3D
Mode occurs. This helps to avoid asking for the 3D Lock
PIN and displaying 3D start message every time when
switching to 3D.
NOTE: This feature cannot be selected until the 3D PIN is
set.
a
In the 3D menu, press B / b to select 3D Safety
Settings and press OK.
b
Enter your 4-digit 3D PIN code.
c
Press B / b to select 3D Timer Lock.
d
Press
c
and
B
/
b
to select On.
This feature helps to remind you not to watch 3D video for
extended periods of time. Once a set period of time has
passed, a dialogue will be shown asking you if you wish to
continue viewing or not.
a
In the 3D menu, press
B
/
b
to select 3D Safety
Settings and press OK.
b
Enter your 4-digit 3D PIN code.
c
Press
B
/
b
to select Enable 3D Timer.
d
Press c and B / b to select 30, 60, 90, or 120
minutes.
e
To cancel the timer, select Off.
a
In the 3D menu, press
B
/
b
to select 3D
Important Info and press OK.
A message will appear.
The left and right eye shutter timing of the glasses can be
swapped. If 3D images look blurred, switch the left and
right sides of the 3D image.
a
Press QUICK to open the Quick Menu.
b
Press
B
/
b
to select 3D Settings and press OK.
c
Press B / b to select Left and Right Image.
d
Press
c
and
B
/
b
to select Swapped and press
OK.
Setting 3D Lock
Setting 3D Timer Lock
Setting Enable 3D Timer
Displaying 3D Important Info
Switching left and right images