Troubleshooting – Toshiba KL934 User Manual

Page 51

Advertising
background image

English - 50 -

English

Spdif Output

You can set Spdif Output as RAW or PCM. If you
select PCM from Spdif Output in DVD menu and
play DVD with Dolby audio, you can get audio output
with two channels via the speakers and the DIGITAL
AUDIO socket. If you select RAW from Spdif Output
in DVD menu and play DVD with Dolby audio,
speakers will be muted and you can get 5+1 Dolby
audio via the DIGITAL AUDIO socket.

Troubleshooting

The picture quality is poor (DVD)

Make sure the DVD disc surface is not damaged.

(Scratch, fi ngerprint, etc.)
Clean the DVD disc and try again.


See instructions described in “Notes on Discs” to clean
your disc properly.

Ensure that the DVD disc is in the loader with the

label facing front.
A damp DVD disc or condensation may effect the

equipment. Wait for 1 to 2 hours in Standby to dry
the equipment.

Disc does not play

No disc in the machine.


Place a disc into the loader.

Disc incorrectly loaded.


Ensure that the DVD disc is in the loader with the
label facing front.

Wrong type of disc. The machine cannot play CD-

ROMS etc.
The region code of the DVD must match the

player.

Wrong OSD language

Select the language in the set-up menu.

The language for the sound or
subtitles on a DVD cannot be changed

Multilingual sound and/or subtitles not recorded on

the DVD.
Try to change the sound or subtitles using DVD’s title

menu. Some DVD’s do not allow the user to change
these settings without using the disc’s menu.

Some functions (Angle, Zoom, etc.) do
not work

These functions are not available on the DVD.

Angle can only be changed when the angle symbol

is displayed.

No picture

Have you pressed the correct buttons on the remote

control? Try once more.

No sound

Check the volume is set to an audible level.

Make sure you have not switched the sound off

accidentally.

Distorted sound

Check that the appropriate listening mode setting

is correct.

No response from remote control

Make sure the remote control is in the correct

mode.
Check batteries are fi tted correctly.

Change the batteries.

If nothing works

If you have tried the above solutions and none seem
to work, try switching your TV off and on again. If this
does not work, contact your supplier or TV repair
technician. Never attempt to repair a defective TV
yourself.

02_MB62_[GB]_(02-DVD)_(IB_INTERNET)_(1911UK_WDIVX_KARAOKE)_10077369_10078000.indd 50

02_MB62_[GB]_(02-DVD)_(IB_INTERNET)_(1911UK_WDIVX_KARAOKE)_10077369_10078000.indd 50

07.05.2012 15:09:43

07.05.2012 15:09:43

Advertising