Toshiba Satellite Pro T110 - Manual (Page 34)

2-2 User’s Manual
T110/T130
Front of the computer with display closed (T110)
1. DC IN LED
2. Power LED
3. Battery LED
4. Disk LED
5. Bridge media slot LED 6. Wireless communication LED
7. Wireless WAN LED
8. Arrow Lock
9. Numeric Lock
1 2 3 4 6 7 8 5 9
DC IN LED The DC IN LED normally glows green when
power is being correctly supplied from the AC
power adaptor.
Power LED The Power LED glows green when the computer
is on. If you select Sleep Mode from Turn Off
Computer, this indicator flashes amber
(two seconds on, two seconds off) while the
computer enters Sleep Mode.
Battery LED The Battery LED shows the condition of the
battery’s charge: Green indicates a full charge,
amber indicates that the battery is charging and
flashing Amber indicates a low battery charge.
Refer to Chapter 6,
Power and Power-Up Modes .
Disk LED The Disk LED glows green whenever the
computer is accessing the built-in hard disk drive.
Bridge media slot
LED The Bridge media slot LED glows green when
the computer is accessing the Bridge media slot.
Wireless
communication LED The Wireless communication LED glows amber
when the Wireless LAN and Bluetooth functions
are turned on. Only some models are equipped
with Wireless LAN and Bluetooth functions.
Wireless WAN LED The Wireless WAN LED glows or blinks blue
when the Wireless WAN function is on. The LED
will glow or blink in order to indicate the
connection status of the Wireless WAN function.
A Wireless WAN module must be installed to use
this function. Some models are equipped with a
Wireless WAN module.