Restarting the computer – Toshiba Portege R930 User Manual

Page 26

Advertising
background image

You can return to your previous working environment immediately
when you turn on the computer.
Saves power by shutting down the system when the computer
receives no input or hardware access for the time period set by the
System Hibernate feature.
Allows the use of the panel power off feature.

Starting Hibernation Mode

You can also enable Hibernation Mode by pressing FN + F4 - please refer
to the

Hot key functions

section in Chapter 3, Operating Basics, for further

details.

To enter Hibernation Mode, follow the steps below.
1.

Click Start.

2.

Point to the arrow icon (

) and then select Hibernate from the

menu.

Automatic Hibernation Mode

The computer can be configured to enter Hibernation Mode automatically
when you press the power button or close the lid. In order to define these
settings, you can follow the steps as described below:
1.

Click Start and click the Control Panel.

2.

Click System and Security and click Power Options.

3.

Click Choose what the power button does or Choose what
closing the lid does
.

4.

Enable the desired Hibernation Mode settings for When I press the
power button
and When I close the lid.

5.

Click the Save changes button.

Data save in Hibernation Mode

When you turn off the power in Hibernation Mode, the computer will take a
moment to save the current data in memory to the hard disk drive. During
this time, the Hard Disk Drive indicator will glow.
After you turn off the computer, and the content of memory has been saved
to the hard disk drive, turn off the power to any peripheral devices.

Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.

Restarting the computer

Certain conditions require that you reset the computer, for example if:

You change certain computer settings.

User's Manual

1-10

Advertising