Toshiba Qosmio X70-B User Manual
Page 68
Do not remove the battery pack while the computer is in Sleep Mode,
as data is stored in RAM, so if the computer loses power it could be
lost.
In Hibernation Mode, data will be lost if you remove the battery pack or
disconnect the AC adaptor before the save is completed.
Do not touch the battery release latch while holding the computer or
the battery pack might fall out due to the unintentional release of the
battery release latch and cause injuries.
Removing the battery pack
To remove a discharged battery, follow the steps as detailed below:
1.
Save your work.
2.
Shut down the computer - ensure that the Power indicator is off.
3.
Remove all cables and peripherals that are connected to the
computer.
4.
Close the display panel and turn the computer upside down.
5.
Slide the battery lock into its unlocked ( ) position.
6.
Slide and hold the battery release latch to disengage the battery pack
and then lift it up to remove it from the computer.
Figure 4-5 Releasing the battery pack
3
2
1
1. Battery lock
3. Battery pack
2. Battery release latch
Installing the battery pack
To install a battery pack, follow the steps as detailed below:
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
1.
Insert the battery pack as far as it will go into the computer.
2.
Ensure that the battery pack is securely in place and the battery lock is
in its locked position.
3.
Turn your computer over.
User's Manual
4-23