Toshiba Qosmio X770 - Manual (Page 82)

Settings for display video on HDMI
To view video on the HDMI device, be sure to configure the following
settings otherwise you may find that nothing is displayed.
Be sure to use the FN + F5 HotKey to select the display device before
starting to play video. Do not change the display device while playing
video.
Do not change the display device under the following conditions.
While data is being read or written.
While communication is being carried out.
Select HD Format
To select the display mode, follow the steps as detailed below:
1.
Click Start and click Control Panel.
2. Click Appearance and Personalization.
3. Click Display.
4. Click Change display settings.
5. Click Advanced settings.
6. Click List All Modes.
7. Select the one of the below selection at List All Modes.
Display mode at List All Modes HD Format
1920 by 1080, True Color (32bit), 60Hz 1080p
1920 by 1080, True Color (32bit), 30Hz (Interlaced) 1080i
1280 by 720, True Color (32bit), 60Hz 720p
720 by 576, True Color (32bit), 50Hz 576p
720 by 480, True Color (32bit), 60Hz 480p
The above display mode is a typical HDMI display mode. The selectable
display modes will vary for different HDMI monitors.
NVIDIA ® 3DTV Play
Only some models are supported with NVDIA ® 3DTV Play function.
When a television is connected to HDMI port and the television is
supporting 3D feature, the NVDIA
® 3DTV Play feature may be enabled
through the following procedure.
Before setting up the NVDIA ® 3DTV Play feature, please ensure the
Internet setup is completed in order to receive notifications via the Internet.
Qosmio X770/X775 Series
User's Manual 3-41