Toshiba Equium A210 - Manual (Page 70)

4-12 User’s Manual
A210
Wireless communications
Wireless communication switch
You can enable or disable the wireless LAN function with the on/off switch.
No transmissions are sent or received when the switch is off. Slide the
switch forward to turn it on and backward to turn it off.
Wireless communication LED
The LED indicates the status of the wireless communication functions.
Using optical disc drives
The illustrations in this section might differ slightly from your drive, but
operation is the same for all optical disc drives. The full-size drive provides
high-performance execution of disc-based programs. You can run either
12 cm (4.72") or 8 cm (3.15") discs without an adapter. An ATAPI interface
controller is used for disc drive operation. When the computer is accessing
a disc, an indicator on the drive illuminates.
If you have a DVD Super Multi drive or HD DVD drive, refer also to the
Writing CD/DVDs on DVD Super Multi drive section or HD DVD drive
section for precautions on writing to CDs.
It may not be possible to make a network connection to a specified network
name using the ad hoc network function. If this occurs, the new network(*)
will have to be configured for all computers connected to the same network
in order to re-enable network connections.
* Please be sure to use new network name.
Turn the switch off in airplanes and hospitals. Check the LED, it stops
glowing when the wireless communication function is off.
LED status Indication
LED off Wireless communication switch is set to off.
LED glows Wireless communication switch is on.
Use the DVD Video Player application to view DVD-Video discs.