Toshiba Portege 3490 - Manual (Page 17)

Multi Media Port Replicator User’s Manual 17
Version
1
Last Saved on 13/03/00 17:13
User's Manual – Port_Rep.doc – PART 01 -- ENGLISH – Printed on 13/03/00 as 01_PRep
GB
Disconnecting the Multi Media Port Replicator
To disconnect the Multi Media Port Replicator, follow the steps below.
If you use hot undocking (computer power on) with the Multi Media Port
Replicator, be sure to select Eject PC from the Start menu. Wait for the
eject sequence to complete, then disconnect the device.
Warm undocking (computer power off in Suspend or Hibernate mode) is
not supported. Do not disconnect the Multi Media Port Replicator when the
computer’s power is off unless it was turned off in Shut Down (boot) mode.
1. Squeeze the latches on either side of the connector.
2. Pull the connector out of the computer connector.
Disconnecting the cable