Toshiba Magnia Z310 - Manual (Page 19)

10
Memo
Some protocol components, such as NWLink protocol, demand a setup like a TCP/IP protocol.
Please perform and continue the required setup operations in the same way.
6. Select the wired LAN card to be connected and click the [OK] button.
If you do not connect a wired LAN card, select "Not Selected".
7. When the following screen is displayed, click the [Finish] button and reboot the system.
8. Set up the required items in the Access Point Configuration Utility.
By default, WEP and MAC address filtering are enabled.
[3.2 Access Point Configuration Utility (Local)]