Toshiba Satellite Pro A50-A - Manual (Page 43)

Only the TOSHIBA Hi-Speed Port Replicator III 180W is applicable
with this Docking port for TECRA W50-A series.
Only the TOSHIBA Hi-Speed Port Replicator III 180W or 120W is
applicable with this Docking port for TECRA A50-A/Satellite PRO A50-
A series.
Do not attempt to use any other Port Replicator.
Keep foreign objects out of the docking port. A pin or similar object
can damage the computer's circuitry.
Memory module slot
cover The slot A and slot B memory module is located
here.
The memory module slot allows for the
installation, replacement and removal of
additional memory module.
The capacity of the memory modules varies
depending on the model. The actual amount of
useable system memory will be less than the
installed memory modules.
Refer to the
Additional memory module section.
Legal Footnote (Memory (Main System))
For more information regarding Memory (Main System), please refer to the
Legal Footnotes section.
Cooling vents The cooling vents help the processor to avoid
overheating.
Do not block the cooling vents. Keep foreign metal objects, such as
screws, staples and paper clips, out of the cooling vents. Foreign metal
objects can create a short circuit, which can cause damage and fire,
possibly resulting in serious injury.
Carefully clean the dust on the cooling vents’ surface using a soft cloth.
Front with the display open
This section shows the computer with the display panel open. In order to
open the display, lift the display panel up and position it at a comfortable
viewing angle for you.
User's Manual 3-8