Toshiba Qosmio X500 - Manual (Page 90)

User’s Manual 4-11
Operating Basics
Starting the USB Sleep and Charge Utility
To start the utility, click Start  All Programs  TOSHIBA  Utilities 
USB Sleep and Charge.
Enabling USB Sleep and Charge
This utility can be used to enable and disable the USB Sleep and Charge
function. Check the "USB Sleep and Charge" checkbox. In the default
state, this function is disabled. Power supply mode settings
There are several USB Sleep and Charge function modes. "Mode4/Typical
Mode" should normally be used. Set one of the other modes (try from
"Mode 3" to "Mode 1")
*1
if the charge function cannot be used in "Mode3/
Alternate Mode". This function may not be able to be used with some
connected external devices even if the appropriate mode is selected. In this
situation, uncheck the "USB Sleep and Charge" checkbox and stop using
this function.
*1 Some mode may not be displayed in the list.
Battery Settings
This utility can be used to specify the lower limit of remaining battery life for
USB Sleep and Charge. Move the slider bar to specify the lower limit. If the
remaining battery life falls before the setting, the "USB Sleep and Charge"
function will be stopped. Unchecking the "Enable under Battery Mode"
checkbox sets the utility to only charge when the AC adaptor is connected.