Digital audio output, Using hdmi cec control, Enable hdmi cec control – Toshiba RL958 User Manual

Page 75: Tv auto power, Auto standby, Enable hdmi cec control tv auto power auto standby

Advertising
background image

75

CONTROLS AND FEATURES

Engl

ish

When connecting a surround sound amplifier to the digital audio

output (Sony/Philips Digital Interface Format [S/PDIF]), the

following options can be selected or adjusted.

a

In the Preferences menu, press

B

or

b

to select AV

Connection and press OK.

b

Press

B

or

b

to select Digital Audio Output.

c

Press OK to display Digital Audio Output menu and
press

B

or

b

to select an option.

Audio Format
Press

C

or

c

to select PCM or Auto.

PCM: This mode outputs PCM format to the digital

audio output socket.

Auto: This mode outputs Dolby Digital (if available)

or PCM to the digital audio output socket.
Dolby Digital

S

Dolby Digital

Dolby Digital Plus

S

Dolby Digital

MPEG

S

PCM

HE-AAC

S

Dolby Digital

Audio Delay
Press

C

or

c

to select Auto or Manual.

Auto:

This mode automatically adjusts the audio
timing to meet the video timing.
NOTE: The time lag might be large between
the image and sound depending on the
connected equipment (amplifier etc.). In that
case, select Manual.

Manual:You can manually adjust the audio signal

timing to meet the video signal timing.

Delay Adjustment
Press

C

or

c

to adjust the audio signal timing

(0 – 250ms) to meet the video signal timing.

NOTE:
• This feature is grayed out when Audio Delay is in

Auto.

• A time lag will occur when the video signal or audio

signal is changed. Adjust the timing accordingly.

• When adjusting the timing, turn down the volume

of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may occur
when the signal is changed.

• Depending on the connected equipment (amplifier,

etc.), adjustment may not be possible.

• When the optical digital output setting (Auto

t

PCM) is

changed, it may be necessary to adjust the timing again.

• Do not use other than for audio output from the AV

amplifier, etc. (Malfunction may occur)

Using HDMI CEC Control

This is a new feature that uses CEC technology and
allows you to control Toshiba HDMI CEC Control
compatible devices from the television remote
control via HDMI connection (page 10).

When the Enable HDMI CEC Control item in the HDMI CEC
Control Setup
menu is set to On, individual functions also set
to On will be activated.

a

Press MENU /

C

c

to highlight Setup icon.

b

Press

B

/

C

c

to highlight Preferences icon and

press OK.

c

Press

B

or

b

to select HDMI CEC Control Setup and

pres OK.

d

Press

b

to select Enable HDMI CEC Control and

press

C

or

c

to select On.

NOTE: If you set Enable HDMI CEC Control to Off, all
other items will be grayed out.

The TV Auto Power setting allows the television to be

automatically switched on if a HDMI CEC Control device is turned

on.

a

In the HDMI CEC Control Setup menu, press

b

to

highlight TV Auto Power.

b

Press

C

or

c

to select On or Off.

When Auto Standby is enabled, the television, when switched

off, will automatically switch off (standby mode) all connected

HDMI CEC Control equipment.

a

In the HDMI CEC Control Setup menu, press

b

to

highlight Auto Standby.

b

Press

C

or

c

to select On or Off.

Digital Audio Output

AV Connection

Input Labeling

Digital Audio Output

Enable HDMI CEC Control

TV Auto Power

Auto Standby

HDMI CEC Control Setup

Enable HDMI CEC Control

On

TV Auto Power

On

Auto Standby

On

Amplifier Control

On

Initial Speaker Setting

TV Speakers

Advertising