Toshiba Satellite Pro L300 - Manual (Page 110)

7-4 User’s Manual
L300/L300D series
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer.
The Boot Priority Options setting will be like the following.
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
This procedure does not affect the settings.
* In this section, CD-ROM refers to the CD-RW/DVD-ROM drive or DVD
Super Multi(+-R DL) drive.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. Use the up/down cursor keys to select boot device you want and press
ENTER.
U Selects the USB diskette drive.
N Selects the network.
1 Selects the primary HDD.
C Selects the CD-ROM*.
ExpressCard HDD boot is not supported.
■ If a supervisor password is set, the menu above does not appear when
you use the user password to start the computer.
■ The selection method above does not change the boot priority settings
in HW Setup.
■ If you press a key other than one of those above or if the selected
device is not installed, the system will boot according to the current
setting in HW Setup.