Sound system, Sound system -25, To the – Toshiba Satellite Pro S750 User Manual

Page 113: Secti, Volume mixer, Microphone level, Audio enhancements

Advertising
background image

User’s Manual

4-25

Operating Basics

4. Hold the CD/DVD by its outside edge or the edge on the center hole -

any fingerprints on the surface of the disc can prevent the drive from

properly reading data.

5. Do not expose the CD/DVD to direct sunlight, extreme heat or cold.
6. Do not place heavy objects on your CD/DVDs.
7. If your CD/DVDs become dusty or dirty, wipe them with a clean dry cloth

from the center hole outwards - do not wipe in a circular direction. If

necessary, you can use a cloth that has been lightly dampened in water

or a neutral cleaner but you must not use benzine, thinner or any similar

cleaning solution.

Sound System

This section describes some of the audio control functions.

Volume Mixer

The Volume Mixer utility lets you control the audio volume for playback of

devices and applications under Windows.

To launch the Volume Mixer utility, right click on the speaker icon on the

Taskbar, and select Open Volume Mixer from the sub menu.

To adjust the volume level of speakers or headphones, move the

Speakers slider.

To adjust the volume level of an application that you are using, move

the slider for the corresponding application.

Microphone Level

Follow the steps below to change the microphone recording level.
1. Right click on the speaker icon on the Taskbar, and select Recording

devices from the sub menu.

2. Select Microphone, and click Properties.
3. On the Levels tab move the Microphone slider to increase or decrease

the microphone volume level.

If you feel the microphone volume level is inadequate, move the

Microphone Boost slider to a higher level.

Audio Enhancements

In order to apply the sound effects for your current speaker, follow the steps

below.
1. Right click on the speaker icon on the Taskbar, and select Playback

Devices from the sub menu.

2. Select Speakers, and click Properties.
3. On the Enhancements tab select the sound effects you would like, and

click Apply.

Advertising