Toshiba Satellite L50T-A - Manual (Page 45)

After an additional memory module is installed, the computer may not
switch to Hibernation Mode normally by using Intel
® Rapid Start
Technology.
Power Condition Descriptions
Power conditions
The computer's operating capability and battery charge status are affected
by different power conditions, including whether an AC adaptor is
connected and what the charge level is for that battery.
The LED in the table below refers to the DC IN/Battery indicator.
Power on Power off
(no operation)
AC adaptor
connected Battery fully
charged • Operates
• No charge
• LED: white • No charge
• LED: white
Battery partially
charged or no
charge • Operates
• Charge
• LED: amber • Quick charge
• LED: amber
AC adaptor
not
connected Remaining
battery capacity
is above low
battery trigger
point • Operates
• LED: off
Remaining
battery capacity
is below low
battery trigger
point • Operates
• LED: flashes
amber
Remaining
battery capacity
is exhausted Computer shuts
down
DC IN/Battery indicator
Check the DC IN/Battery indicator to determine the status of the battery
pack and the power status with the AC adaptor connected. The following
indicator conditions should be noted:
User's Manual 3-15