Toshiba Qosmio X870 - Manual (Page 91)

Settings for display video on HDMI
To view video on the HDMI display device, be sure to configure the
following settings otherwise you may find that nothing is displayed.
Be sure to use the HotKey to select the display device before starting to
play video. Do not change the display device while playing video.
Do not change the display device under the following conditions.
While data is being read or written.
While communication is being carried out.
Select HD Format
To select the display mode, follow the steps as detailed below:
1.
Click Start and click Control Panel.
2. Click Appearance and Personalization.
3. Click Display.
4. Click Change display settings.
5. Click Advanced settings.
6. Click List All Modes.
7. Select one of the mode at List All Modes.
REGZA Link (PC Control)
Some models are supported with the REGZA Link (PC Control).
HDMI out port can connect with Type A connector HDMI cable.
One HDMI cable can send and receive video, audio and control signals.
HDMI-CEC (Consumer Electronics Control) is a standard in the CE
Industry which allows devices to work together over an HDMI cable.
By connecting a TV which supports HDMI Control to this port, the remote
control for the connected TV can be used to operate some of the computer
functions.
Using REGZA Link (PC Control)
Toshiba notebooks with REGZA Link (PC Control) include a Toshiba utility
dedicated to take advantage of its capabilities which can allow you to:
Use the TV remote control to output the computer screen onto the TV
screen.
Use the TV remote control to launch, operate and close applications
on your computer.
Turn on the TV when the HDMI output is selected using the hot key.
Switch the video output (HDMI or LCD) when executing certain
desktop icons.
X870
User's Manual 3-50