Connecting the modular cable, Disconnecting the modular cable – Toshiba SATELLITE A500 User Manual

Page 129

Advertising
background image

User’s Manual

4-43

Satellite A500/A500D

Connecting the modular cable

To connect the modem’s modular cable, follow the steps as detailed below:

1. Plug the end of the modular cable into the computer’s modem jack.

2. Plug the other end of the modular cable into a telephone jack.

Figure 4-11 Connecting the internal modem

Disconnecting the modular cable

To disconnect the modular cable, follow the steps as detailed below:

1. Pinch the lever on the plug in the telephone jack and pull it out from

within the connector.

2. Pinch the lever on the plug in the computer’s modem jack and pull it out

from within the computer.

Connection to any communication line other than an analog phone line
could cause a computer system failure.

Connect the built-in modem only to ordinary analog phone lines.

Never connect the built-in modem to a digital line (ISDN).

Never connect the built-in modem to the digital connector on a
public telephone or to a digital private branch exchange (PBX).

Never connect the built-in modem to a key telephone system for
residences or offices.

Avoid using your computer modem with the telephone cable connected
during an electrical storm. There may be a remote risk of electric shock
from lightning.

Do not pull on the cable or move the computer while the cable is
connected.

Advertising
This manual is related to the following products: