Installing a memory module – Toshiba Satellite P875 User Manual
Page 87
Installing a memory module
To install a memory module, follow the steps as detailed below:
1.
Shut down the computer - make sure the Power indicator is off (refer
to the
section in Chapter 1, Getting Started if
required).
2.
Remove the AC adaptor and all cables and peripherals connected to
the computer.
3.
Close the display panel.
4.
Turn the computer upside down and remove the battery pack (refer to
section in Chapter 5, Power and Power-Up
Modes, if required).
5.
Loosen the screw securing the memory module cover in place -
please note that the screw is attached to the cover in order to prevent
it from being lost.
6.
Slide your fingernail or a thin object under the cover and lift it off.
Figure 3-12 Removing the memory module cover
2
1
1. Memory module cover
2. Screw
P870/P875
User's Manual
3-41