Toshiba Camileo User Manual
Page 24
24
Photo Frame (Picture Record Mode Only)
Your camera features popular electronic photo frame. You can take your picture with preferred
electronic photo frame. To enable Photo Frame:
1. When in Camera Mode, use Up/Down Buttons to select Photo Frame option, then press Enter
Button to switch to Photo Frame submenu.
2. Use Up/Down Buttons to locate preferred photo frame. Then select Set option and press Enter
Button to validate the setting and exit.
Display Screen
Photo Frame Option
Flash (Picture Record Mode Only)
This camera has two flash settings. To change flash setting by either hot key (Right Button) or
Option Setting.
Auto-flash(
)
：the flash fires automatically according to light conditions. Use this mode for
general photography.
Flash Off(
)
：the flash will not fire under any circumstances. Use this mode when taking
images in a place where flash photography is prohibited, or when the subject is distant (beyond
the range of the flash).
Enter Button