When writing or rewriting – Toshiba Satellite Pro U200 User Manual

Page 88

Advertising
background image

4-20

User’s Manual

Operating Basics

■

Do not write while a virus check software is running. Wait for it to finish

and then disable virus detection programs including any software that

checks files automatically in the background.

■

Do not use hard disk utilities, including those intended to enhance hard

disk drive access speed. They may cause unstable operation and data

damage.

■

CD-RW (Ultra Speed +) media is not supported. If used, data may be

lost or damaged.

■

Write from the computer’s hard disk drive to the CD/DVD. Do not try to

write from shared devices such as a LAN server or any other network

device.

■

Writing with software other than RecordNow! Basic for TOSHIBA

(optional), TOSHIBA Disc Creator (optional) and InterVideo WinDVD

Creator Platinum is not recommended.

When writing or rewriting

Please observe/consider the following when you write or rewrite to a

CD-R/RW, DVD-R/-R DL/-RW/-RAM or DVD+R/+R DL/+RW disc.

■

Do not perform any of the following actions when writing or rewriting:

■

Change users in the Windows XP operating system.

■

Operate the computer for any other function, including using a

mouse or Touch Pad or closing/opening the LCD panel.

■

Start a communication application such as a modem.

■

Apply impact or vibration to the computer.

■

Install, remove or connect external devices, including the following:

PC card, SD/SDIO card, Memory Stick/Memory Stick Pro, xD

picture card, MultiMediaCard, USB devices, external monitor, i.LINK

devices, optical digital devices.

■

Use the Audio/Video control button to reproduce music or voice.

■

Open the optical disc drive.

■

Remove the optical disc from the Optical Disc Drive.

■

Do not use shut down/log off and standby/hibernation while writing or

rewriting.

■

Make sure writing or rewriting is completed before going into

standby/hibernation. Writing is completed if you can open the

DVD-ROM&CD-R/RW or DVD Super Multi drive tray.

■

Set the computer on a level surface and avoid places subject to

vibration such as airplanes, trains, or cars. Do not use an unstable

surface such as a stand.

■

Keep mobile phones and other wireless communication devices away

from the computer.

■

Always copy data from the hard disk drive to the optical disc. Do not use

cut-and-paste. The original data will be lost if there is a write error.

Discs created in DVD-R DL format4 (Layer Jump Recording) cannot be

read.

Advertising