Manual tuning, analogue fine tuning, English – Toshiba L3455 User Manual

Page 19

Advertising
background image

English - 18 -

English

Manual Tuning, Analogue Fine Tuning

The television can be tuned-in manually using Manual Search feature.

Digital Aerial Manual Search

The feature is available for service engineers or

can be used for direct channel entry if the multiplex

channel is known.
• Select

Manual channel scan from the Install and

Retune menu and press OK.

After selecting search type as

Digital Aerial, you

can enter the multiplex or frequency number using

the numeric buttons and press

OK button to search.

• Enter the multiplex number using the numeric

buttons. The television will automatically search

for that multiplex. When the multiplex is found any

channels not currently on the programme list will be

added and the programme information at the top of

the screen will be updated.

• Repeat as necessary.

Digital Cable Manual Search

• In cable manual scan, you can enter frequency,

modulation, symbol rate and network channel scan

options. After selecting search type as

Digital Cable,

you can set the desired options and press

OK button

to search.

Analogue Manual Search

Only if an analogue signal or Service is available.

The television can be tuned-in manually. For example:

if the television cannot be connected to a media

recorder/decoder with a

SCART lead or to tune-in a

station on another System.
To allocate a programme position on the television

for a decoder and media recorder: turn the decoder

on, insert a pre-recorded film into the media recorder

and press

PLAY, then manually tune.

After selecting search type as

Analogue, you can

use

Up or Down button to highlight an item and then

press

Left or Right button to set an option.

Enter the channel number or frequency using the

numeric buttons. You can then press

OK button

to search. When the channel is located, any new

channels that are not on the list will be stored.

Analogue Fine Tune

Only if an analogue signal or Service is available.

• Select

Analogue Fine Tune from the Install and

Retune menu by using Up or Down and OK

buttons. Analogue fine tune screen will be displayed.

Analogue Fine Tune feature will not be available if
there are no analogue channels stored.

• Use

Left or Right button to set Fine Tune. When

finished, press

OK button.

Clear Service List (*)

(*) This setting is visible only when the Country option

is set to Denmark, Sweden, Norway or Finland.
• Select

Clear Service List from the Install and

Retune menu by using Up or Down and OK buttons.

A confirmation message will be displayed. If you

want to delete all channels, select

Yes and press

OK. Use this setting to clear channels stored.

Advertising