Toshiba Pocket PC e330 - Manual (Page 26)

Basic Skills
User's Manual 2-8
TOSHIBA Pocket PC e350 Version
1
Last Saved on 02/05/2003 14:35
ENGLISH using Euro_M.dot –– Printed on 02/05/2003 as e350_UK
Initial Setup
When using the Toshiba Pocket PC for the first time, follow the initial
setup procedures below after the battery has been charged.
1.
Move the battery switch to the “supply” position. The Toshiba
Pocket PC powers on automatically and the Welcome screen
appears. Tap the screen to start the following setup.
2. Execute touch screen correction.
When the align screen appears, tap the centre of the cross target with
the stylus. The next target position changes upon tapping the target.
Five taps complete the positioning correction. The screen then
changes to the Stylus screen.
If a finger or any other object touches the screen during correction,
the correction will be cancelled. Repeat the correction procedure.
3. Read how to use the stylus.
Read and understand the stylus operation, and then tap NEXT.
For more information on stylus operation, see “How to Use the Stylus” in
this chapter.
4. Learn the pop-up menu operation.
Read the on-screen explanation and then follow the instructions.
Display the pop-up menu, and cut and paste the data according to
the screen instructions.
After you finish the paste operation, this stage is completed. Tap
NEXT
.
5. Set the TIME ZONE.
When tapping the right mark, the city and the time zone lists
appear. Tap the desired city and time zone.
When the setup is completed, tap NEXT.
6. Complete the initial setup.
When the Complete screen appears, the initial setup is completed.
After tapping the screen, you can use the Toshiba Pocket PC.
When you tap the Complete screen, the Today screen appears. For more
information on the Today screen, see “Today screen” in this chapter.