Toshiba SD490 - Manual (Page 33)

33
Function setup
Video Out
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the / button to select
Video Out.
4) Press ENTER button, then use the / button to select
the output mode (Composite, RGB or HDMI).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Composite:Select if you connect the DVD to your TV via
composite video (yellow) input.
RGB: Select if you connect the DVD to your TV which has
RGB inputs by scart cable.
HDMI: High Definition Multimedia Interface. Select if you
connect the DVD to TV via HDMI input.
HDMI Resolution
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the / button to select
HDMI Resolution.
4) Press ENTER button, then use the / button to select
the options (Auto, 480p/576p, 720p, 1080i or 1080p).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Notes
• If the Video Out is not set to “HDMI”, you cannot select
the “HDMI Resolution”.
• Select the HDMI resolution according to the performance
of the connected TV.
Aspect Ratio : 16 : 9
HDMI Resolution
: Auto Fit
: PAL
HDMI
Video Out
HD Mode JPEG
TV System
RGB
Composite
JPEG Interval : 5 seconds
Aspect Ratio : 16 : 9
: Auto Fit
Video Out
: PAL
480p/576p
1080i
1080p
720p
Auto
HDMI Resolution
HD Mode JPEG
TV System
JPEG Interval
Aspect Ratio : 16 : 9
: Auto Fit
: Auto
Off
On
Video out
HDMI Resolution
HD ode JPEG M
: PAL TV System
: HDMI
JPEG Interval
HD JPEG Mode
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the / button to select HD
JPEG Mode.
4) Press ENTER button, then use the / button to select
On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
On: JPEG image is displayed in a suitable picture quality
(480p/576p, 720p, 1080i or 1080p).
Off: The picture quality is fixed to 480p/576p.
NTSC: Select if your TV system is NTSC.
PAL:
Select if your TV system is PAL.
Auto: The DVD player automatically identifies PAL or
NTSC video system of a disc. Connect a multisystem TV
(PAL / NTSC compatible) to view a picture. A playback picture
may be distorted when detected a signal change between
PAL and NTSC on the disc. For the case of Progressive
mode, your multisystem TV must be able to support 525p
and 625p.
TV System
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the / button to select TV
System.
4) Press ENTER button, then use the / button to shift
and change the TV system.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Aspect Ratio : 16 : 9
HDMI Resolution
: Auto Fit
Auto
Video Out
NTSC TV System
PAL
HD Mode JPEG
JPEG Interval : 5 seconds
Notes
• If the Video Out is not set to “HDMI”, you cannot select
the “HD JPEG Mode”.
• All JPEG pictures will not be output through the VIDEO
OUT jack and SCART socket when 720p, 1080i, 1080p
or Auto is selected with HD JPEG Mode on.
• For HDMI output, DISPLAY and ZOOM buttons only work
in 480p/576p resolution mode when HD JPEG Mode is
On.