Toshiba PX30t-C - Manual (Page 118)

Problem Procedure
Memory media card
error occurs Remove the memory media card from the
computer and then reinsert it in order to ensure it is
firmly connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
You cannot write to
a memory media
card Remove the memory media card from the
computer and check to ensure that it is not write
protected.
You cannot read a
file Check to ensure the required file is actually on the
memory media card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
Pointing device
If you are using a USB mouse, you should also refer to both the USB
mouse section and the documentation supplied with your mouse.
USB mouse
Problem Procedure
On-screen pointer
does not respond to
mouse operation In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
Remove the mouse from the computer and then
reconnect it to a free USB port in order to ensure it
is firmly attached.
Double-clicking does
not work In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1.
To access this utility, click Desktop ->
Desktop Assist (in taskbar) -> Control
Panel -> Hardware and Sound -> Mouse.
2. Within the Mouse Properties window, click the
Buttons tab.
3. Set the double-click speed as required and
click OK.
User's Manual 6-8