Installing a memory module – Toshiba Satellite NB10-A User Manual
Page 60
9.
Seat the memory module cover in place and secure it with the screw.
Take care to ensure that the memory module cover is firmly closed.
Figure 4-7 Seating the memory module cover
2
1
1. Memory module cover
2. Screw
Product appearance depends on the model you purchased.
10. Install the battery pack - refer to
required.
11. Turn the computer over.
Installing a memory module
To install a memory module, follow the steps as detailed below:
1.
Click Power in the Settings charm, and then click Shut down while
holding down the SHIFT key - ensure that the Power indicator is off.
2.
Remove the AC adaptor and all cables and peripherals connected to
the computer.
3.
Close the display panel.
4.
Turn the computer upside down and remove the battery pack.
5.
Loosen the screw securing the memory module cover in place.
6.
Slide your fingernail or a thin object under the cover and lift it off.
User's Manual
4-15