Toshiba BDX1100 - Manual (Page 19)

1
E
ng
lis
h
• [Video Adjust]
Select a predefined setting of the video.
1..Press.OK..
2..Press/ to adjust the video
Brightness, Contrast, Hue and Saturation.
{Brightness}.-.press./.to.adjust.
the brightness of display, goes left
means.dark.and.right.means.bright.
{Contrast}.-.press./.to.adjust.
the contrast of display, goes left
means.low.contrast.and.right.means.
high.contrast.
{Hue}.-.press./.to.adjust.the.Hue.
of display, goes left means low hue
and.right.means.high.hue.
{Saturation}. -. press. /. to. adjust.
the saturation of display, goes left
means.low.Saturation.and.right.means.
high.saturation.
3..Press.RETURN.to.exit.
Brightness
Contrast
Hue
Saturation
RETURN Exit Change
• [Sharpness]
Select the level of sharpness: High,
Medium, Low
{High}.-.Select.High.sharpness.level
{Medium}.-.Select.Medium.sharpness.
level
{Low}.-.Select.Low.sharpness.level
[Motion Video Process]
TV Video Mode
Video Process
Motion Video...
... Display Setting...
SETUP Exit
Move cursor key to select menu option
then use “OK ” key to select
• [Video Mode]
Select the output mode of video,options
include: Standard, Vivid, Smooth, these
can.change.the.output.display.
{Standard}.output.video.signal.without.
any.processing.and.in.standard.mode.
{Vivid}.output.video.signal.in.vibrant.
color.mode.
{Smooth}.output.video.signal.in.smooth.
mode.
Audio Setting
1. Press.SETUP
[General Setting] menu.is.displayed.
2. Press  to.select.[Audio Setting],
then.press...
3. Select an option, press  to.access.
SETUP Exit
Audio Output Spdif PCM
PCM
48K
HDMI
Down_samp
Off DRC
... Audio Setting...
Move cursor key to select menu option
then use “OK ” key to select
4. Press / to.select.a.setup.option.and
press ..
5. Select.the.setting.you.wish.to.change
and press OK to confirm.
-.Press  to.return.to.the.previous.
menu.
-.Press SETUP.to.exit.the.menu..
[Audio Output]
• [Spdif]
Select.the.output.mode.of.COAXIAL.
jack, options include Bitstream, PCM,
Re-encode.and.Off.
{Bitstream}.–.Output.digital.signal.
without.any.processing.
{PCM}.–.Output.digital.signal.with.
processing, only two channels export.
{Re-encode}.–.Auto.select.signal.type.
from.COAXIAL.jack.according.to.the.
Audio.stream.on.disc.
{Off}.–.No.output.for.S/PDIF.
• [HDMI]
Select.the.output.mode.of.HDMI.Out.
jack, options include Bitstream, PCM,
Re-encode.and.Off.
{Bitstream}.–.Output.HDMI.digital.
signal.without.any.processing.
{PCM}.–.Output.HDMI.digital.signal.
with processing, only two channels
export.
{Re-encode}.–.Auto.select.signal.type.
from.HDMI.Out.jack.according.to.the.
Audio.stream.on.disc.
{Off}.–.No.output.for.HDMI.
• [Down_samp]
Select. the. digital. audio. signal. sampling.
frequency.
{48K}.–.For.discs.recorded.at.sampling.
rate.of.48.kHz.
{96K}.–.For.discs.recorded.at.sampling................
rate.of.96.kHz..