Toshiba Pocket PC e750 - Manual (Page 116)

Wi-Fi (IEEE 802.11b) Wireless LAN
User's Manual 8-9
TOSHIBA Pocket PC e750 Version
1
Last Saved on 17/02/2003 14:46
ENGLISH using Euro_C.dot –– Printed on 17/02/2003 as e750
Scan Page
Use Scan page to scan and select scannable AP and Ad-hoc devices.
Click Start > Settings > System > Wireless LAN Utility > Scan
■ Rescan: Rescan scannable Access Point(s) and Ad-hoc connectable
Device(s). If you double tab menu after scanning, you can try to
connect tapped AP or Ad-hoc device. If you are unable to see any
Access points in that menu, check your access point setting. Some
Access Points are set to refuse scanning.
■ Network Selection: Each Access Point is identified by its BSSID and
SSID. Double-click on the BSSID to choose the Access Point/802.11
Ad Hoc group you want to connect with.
■ Signal: Indicates the signal strength of the Access Point.
802.11 Ad Hoc Network Icon
Access Point Icon