Data verification, How to learn more about toshiba disc creator, Wireless communications – Toshiba NB510 User Manual

Page 41: Wireless communications -8

Advertising
background image

When you back up a DVD disc, be sure that the source drive supports
recording to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R
(Double Layer) or DVD+RW media - if this is not the case then the
source disc might not be backed up correctly.
When you back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R,
DVD+R (Double Layer) or DVD+RW disc, be sure to use the same
type of disc.
You cannot partially delete any data written to a CD-RW, DVD-RW or
DVD+RW disc.

Data Verification

To verify that data has been written or rewritten correctly to a data CD/DVD
you should follow the steps below before you begin the write/rewrite
process:
1.

Click Start -> All Programs -> TOSHIBA -> Media & Entertainment
-> Disc Creator
to access the TOSHIBA Disc creator utility.

2.

Display the setting dialog box by one of the following two steps:
Click the Recording settings button (

) for writing on the main

toolbar in the Data CD/DVD mode.
Select Settings for Each Mode -> Data CD/DVD in the Settings
menu.

3.

Mark the Verify Written Data check box.

4.

Select File Open or Full Compare mode.

5.

Click the OK button.

How to learn more about TOSHIBA Disc Creator

Please refer to the Help files for additional TOSHIBA Disc Creator
information.

Wireless communications

The computer’s wireless communication function supports some wireless
communication devices.
Only some models are equipped with both Wireless LAN and Bluetooth
functions.

Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a
microwave oven or in areas subject to radio interference or magnetic
fields. Interference from a microwave oven or other source can disrupt
Wi-Fi or Bluetooth operation.

NB510

User's Manual

3-8

Advertising