Toshiba Qosmio G20 (PQG20) - Manual (Page 209)

User’s Manual 10-17
Troubleshooting
TV output signal
i.LINK (IEEE1394)
Problem Procedure
Display on TV is poor Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
No display Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5, The Keyboard .
If problems persist, contact your dealer.
If you turn the computer off into Standby Mode while the display is on TV,
the computer will select either the internal LCD or an external computer
CRT as the display device the next time it is switched on.
Problem Procedure
i.LINK device does not
function
Make sure the cable is securely connected to the
computer and to the device.
Make sure the device’s power is turned on.
Click start, click Control Panel and double-click
the Add Hardware icon. Follow the on-screen
directions.
Restart Windows.
If problems persist, contact your dealer.