Toshiba USB 2.0 Port Replicator II - Manual (Page 3)

2
LED INDICATOR DESCRIPTION
◎ GOOD-LINK STATUS
- When the USB 2.0 Port Replicator II connects to a Desktop PC or notebook, all of
the LED indicators will turn on (except the “10/100M Link” LED, which only turns
on if Ethernet is plugged in).
◎ POWER LED indicator
- When just the power adapter plugs into the USB 2.0 Port Replicator II, the
POWER LED indicator and PS/2 LED will turn on.
◎ ETHERNET LED indicator
- When there is an Ethernet link, the LAN LED indicator will turn red .
- When there is an Ethernet link running at 100 Mbps, the LAN LED indicator will
blink
red and green .
NOTES
◎ For stable operation of the USB 2.0 Port Replicator II, please use the included power
adapter.
◎ When the USB 2.0 Hub ports become overloaded, please refresh or un-plug and then
plug in the USB 2.0 Port Replicator II into the computer to reset the ports.