Toshiba NB200 User Manual
Page 48
User’s Manual
3-15
Getting Started
5. After TOSHIBA Recovery Media Creator starts, select the SDHC Card
and then click the Start button.
6. Follow the on-screen instructions.
Restoring the pre-installed software from the SDHC Card
If pre-installed files are damaged, use your created Recovery SDHC Card
to restore them.
To restore the operating system and all pre-installed software, follow the
steps below.
1. Ensure that there is uninterrupted power supply through out the
recovery process by connecting to the AC power supply and checking
whether the battery is fully charged.
2. Insert the Recovery SDHC Card into the Bridge media slot.
3. Turn on the computer and immediately press the F12 key.
4. The menu for selecting the boot up media sequence appears.
If the Error message 0x10006 appears, make sure that the SDHC Card is
unlocked.
When you reinstall the Linux Ubuntu operating system, the hard disk will
be reformatted and all data will be lost.