Picture recording, Using flash or digital light function, Using zoom function – Toshiba Camileo H30 User Manual

Page 16

Advertising
background image

16

EN

Picture Recording

In Picture Record Mode (The

Picture Record LED Indicator

lights up), press OK Button halfway

down until the focusing frame turns from white to green. Then, press it fully down to take a picture.
Press Playback Button to view the picture.

Three resolution settings are available:

Image Quality

High Quality:16 Mega Pixels

Standard Quality:10 Mega Pixels

Low Quality:3 Mega Pixels

Using Flash or Digital Light Function

This camcorder has three flash settings and one setting to allow you to extend the brightness of the

objects that are dark or in the shadow. Using Left Button to change the settings.

Flash Auto (

1.

): The flash fires automatically according to light conditions. Use this mode for

general photography. (Picture Recording Only)
Red Eye

2.

Reduction(

): The pre-flash will fire to reduce the red-eye effect. (Picture Recording

Only)
Digital Light

3.

(

): To extend the dynamic range for backlight and high contrast sense so that

the objects will be brighter and clearer.
Flash Off (

4.

): The flash will not fire under any circumstances. Use this mode when taking

images in a place where flash photography is prohibited, or when the subject is distant (beyond
the range of the flash). (Picture Recording Only)

Note

The flash will be disabled automatically when the battery power is low (

).

Using Zoom Function

The zoom magnifies images when recording movies or taking pictures.

To zoom in/out, press the Tele/Wide Button.

1.

It can be set from 1X~5X (5X Optical zoom and 1X Digital zoom)/1X~20X (5X Optical zoom and4X

2.

Digital zoom)

Advertising