Toshiba Satellite M60 - Manual (Page 107)

User’s Manual 7-3
HW Setup
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer.
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
To select the boot device by using the device selection menu, follow the
steps below.
1. Switch on the computer and press F12 to enter the boot device
selection menu.
2. The boot device selection menu provides the options of starting from
the Hard Disk Drive, CD/DVD, FDD, or LAN.
3. Use the upper/lower cursor keys to highlight the boot device you want
and press Enter.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in standby mode.
USB
Legacy USB Support
Use this option to enable or disable Legacy USB support. If your operating
system does not support USB, you can still use a USB mouse, keyboard,
and floppy drive by enabling the appropriate legacy USB support option.
U Selects the USB floppy disk drive.
N Selects the Network.
C Selects optical media drive.
Enabled Enables the Wake-up on Keyboard function.
Disabled Disables the Wake-up on Keyboard function
(Default).
The Wake-up on Keyboard function consumes power even when the
system is off. Leave the AC adaptor connected while using this feature.
Do not install or remove an optional memory module while Wake-up on
Keyboard is enabled.