Toshiba Qosmio DX730 - Manual (Page 49)

You can configure the Function Keys Mode by selecting the "Special
function mode" or "Standard F1-F12 mode". Please refer to the
HW Setup
section in Chapter 4, Utilities & Advanced Usage.
Hot Key Cards
The Hot Key Cards are normally hidden from view.
To use the Hot Key Cards:
1.
Start the TOSHIBA Flash Cards using the following methods:
Press and hold the FN key (in Standard F1-F12 mode).
Press the associated Hot key (in Special function mode).
2. Select the desired option.
The selected Card is displayed full-size with its available options
below it. All other Cards are again hidden from view.
To use a Hot Key Card using a hot key in Standard F1-F12 mode:
1.
Press and hold the FN key.
2. Press the hot key associated with the desired function. The associated
hot key card appears at the top of the screen with its available options
below it.
3. To cycle through the displayed options, hold down FN and press the
hot key repeatedly. Release the FN key when the desired option is
selected.
For more information, please refer to the TOSHIBA Flash Cards Help file.
To access this help, click Start -> All Programs -> TOSHIBA -> Tools &
Utilities -> Flash Cards. In the Settings for Flash Cards window, click
the Help button.
Hot keys
This section describes the associated functions of the hot keys.
Special
function mode Standard F1-
F12 mode Function
F1 FN + F1 Launches the help file supplied with
the software.
F2 FN + F2 Decreases the computer's display
panel brightness in individual steps.
F3 FN + F3 Increases the computer's display
panel brightness in individual steps.
User's Manual 3-4