Toshiba Portege A600 - Manual (Page 152)

User’s Manual 7-2
HW Setup
Display
This tab is only supported some models and can let you customize your
computer’s display settings for either the internal display or an external
monitor.
Power On Display
This tab allows you to select the display to be used when the computer is
started. Please note that this setting is only available on standard VGA
mode and is not available as part of the Windows Desktop properties.
Boot Priority
Boot Priority Options
This tab allows you to select the priority for booting the computer - the
following settings are available:
Auto-Selected Selects an external monitor if one is connected,
otherwise, it selects the internal display (default).
System LCD Only
Selects the internal LCD, even if an enternal
monitor is connected.
FDD −> HDD −>
CD-ROM −> LAN
The computer looks for bootable files on devices
in the following order: 1. floppy diskette drive *1 , 2.
hard disk drive, 3. CD-ROM *2 , 4. LAN.
HDD −> FDD −>
CD-ROM −> LAN
The computer looks for bootable files on devices
in the following order: 1. hard disk drive, 2. floppy
diskette drive *1 , 3. CD-ROM *2 , 4. LAN.
FDD −> CD-ROM −>
LAN −> HDD
The computer looks for bootable files on devices
in the following order: 1. floppy diskette drive *1 , 2.
CD-ROM *2 , 3. LAN, 4. hard disk drive.
HDD −> CD-ROM −>
LAN −> FDD
The computer looks for bootable files on devices
in the following order: 1. hard disk drive, 2. CD-
ROM *2 , 3. LAN, 4. floppy diskette drive *1 .
CD-ROM −> LAN −>
FDD −> HDD
The computer looks for bootable files on devices
in the following order: 1. CD-ROM *2 , 2. LAN, 3.
floppy diskette drive *1 , 4. hard disk drive.
CD-ROM −> LAN −>
HDD −> FDD
The computer looks for bootable files on devices
in the following order: 1. CD-ROM *2 , 2. LAN, 3.
hard disk drive, 4. floppy diskette drive *1 .