Toshiba NB520 - Manual (Page 56)

8. Seat the memory module cover in place and secure it with the screws.
Take care to ensure that the memory module cover is firmly closed.
Figure 3-13 Seating the memory module cover
2
1 1
1. Screws 2. Memory module cover
9. Install the battery pack - refer to Replacing the battery pack section in
Chapter 5, Power and Power-Up Modes, if required.
10. Turn your computer over.
11. Turn the computer on and make sure the added memory is recognized
- to confirmed it, Start -> Control Panel -> System and Security ->
System icon.
External monitor
Some models are equipped with an External RGB monitor port.
An external analog monitor can be connected to the External RGB monitor
port on the computer. To connect a monitor, follow the steps as detailed
below:
Connecting the monitor cable
1. Connect the monitor cable to the External RGB monitor port.
Figure 3-14 Connecting the monitor cable to the External RGB monitor port
2
1
1. Monitor cable 2. External RGB monitor port
2. Turn the external monitor's power on.
When you turn on the power, the computer will automatically recognize the
monitor and determine whether it is a color or monochrome device. In the
NB520 series
User's Manual 3-22