Toshiba W1443 - Manual (Page 13)

English - 13 -
English
Controlling the TV
A wide variety of external equipment can be connected via the sockets located on the side and back of the
TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the
control switch on the left side of the TV may be used for some functi ons.
Switching on
If the standby LED is unlit, check that the mains plug
is connected to the power and press the middle of
the button on the left side of the TV to switch the
television on.
To put the television into Standby, press button on
the remote control. To view the television, press
button again. The picture may take a few seconds
to appear.
Note: The active Standby LED colour will turn to red
in a few moments when the TV is switched off.
For energy saving:
Turning the TV off at its mains supply, or un-plugging
it, will cut energy use to nearly zero for all TV’s. This
is recommended when the TV is not being used for a
long time, e.g. when on holiday.
Using the Remote Control
Press the MENU button on the remote control to see
the menus.
The main menu appears as a group of icons each
for a menu option. Press the Left or Right button to
select a topic.
In sub menu screen
mode the menu appears as a
list. Press the Up or Down button to select a topic.
To use the options press the Up and Down buttons
on the remote control to move up and down through
them and OK, Left or Right buttons to select the
required choice. Follow the on screen instructions.
The functions of each menu are described in detail
throughout the manual.
Using the Controls on the TV
Using the menu wheel on the side of the TV:
To change volume: Press the middle button
until the volume level OSD appears. Increase the
volume by pushing the button up. Decrease the
volume by pushing the button down.
To change channel: Press the middle button until
the channel information banner appears. Scroll
through the stored channels by pushing the button
up or down
To change source: Press the middle button until
the source list appears. Scroll through the available
sources by pushing the button up or down.
To turn the TV off: Press the middle of the button
down and hold it down for a few seconds, the TV
will turn into standby mode.
Please always refer to the owner’s manual of the
equipment to be connected for full details.