Toshiba Portege M780 - Manual (Page 225)

User’s Manual C-3
PORTÉGÉ M780
*2 The band width and the channel which can be used depends on the
installed wireless LAN module. And the approved channels on using are
different at each country or region. When using these channels in any
country or region, refer to the addendum sheet which is Approved
Countries/Regions for use. The channel configuration is managed as
follows:
■ For wireless clients that operate in a Wireless LAN Infrastructure, the
Wireless LAN module will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
■ For Wireless LAN modules installed in wireless clients that operating in
a peer-to-peer mode, the module will use the default channel 10.
■ In a Wireless LAN Access Point, the Wireless LAN module will use the
factory-set default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
5GHz Band Channels Sets (Wireless IEEE 802.11 Revision a and n)
Frequency Range
Channel ID 5150-5850 MHz
34 5170* 1
36 5180* 1
38 5190* 1
40 5200* 1
42 5210* 1
44 5220* 1
46 5230* 1
48 5240* 1
52 5260* 1
56 5280* 1
60 5300* 1
64 5320* 1
100 5500* 1
104 5520* 1
108 5540* 1
112 5560* 1
116 5580* 1