Changing the display settings, Toshiba hi-speed port replicator iii 180w/120w, Toshiba hi-speed port replicator iii 180w/120w -40 – Toshiba Satellite Pro A50-A User Manual

Page 89: Toshiba hi-speed port, Replicator iii 180w/120w

Advertising
background image

A compatible external display with built-in support for Intel WiDi.
An external display with HDMI port and a digital adaptor featuring Intel
WiDi.
The adaptor is a device that connects to the external display via HDMI
port and can receive Wi-Fi signals from your computer.

Type "Intel WiDi" from the Start screen and click Intel(R) WiDi. Intel WiDi
application will launch and you are ready to start the connection.
To learn more details on how to complete the connection, please refer to
the application help.

Some copy protected media contents may not play on the external displays
via Intel WiDi.

Changing the display settings

After one or more external displays are connected, the operating system
can automatically detect, identify and setup the display settings.
You can also manually manage how the external displays will work and
change the display settings by pressing P while holding down the
Windows (

) key. If you disconnect the external display before you turn

the computer's power off, be sure to switch to the internal display.

TOSHIBA Hi-Speed Port Replicator III 180W/

120W

In addition to the ports available on the computer, the TOSHIBA Hi-Speed
Port Replicator III 180W/120W also provides several kinds of ports.
The Port Replicator connects directly to the docking interface on the
underside of the computer. The AC adaptor connects the Port Replicator to
a power source.

You must connect the AC adaptor before you connect to a Port
Replicator.
When a Port Replicator is connected to the computer, the following
ports on the computer are not operational: LAN jack, DC IN 19V jack
and Headphone/Microphone jack.
When connecting an AC Adaptor to the Port Replicator, use only the
AC Adaptor included with Port Replicator. Do not use the computer’s
AC Adaptor.
Refer to the Port Replicator’s User's Manual for more details.

To dock your computer in the Port Replicator, follow the steps below:
1.

Align the top right corner of your computer to the C’ mark on the Port
Replicator.

User's Manual

4-40

Advertising
This manual is related to the following products: