Toshiba BDX3300 - Manual (Page 21)

21
English
resolution setting.
{Off} – Disable 1080/24p video
resolution setting.
Notes about HDMI 1080/24p:
If you want the 1080/24p output, it should fulfill
below 3 conditions:
1.TV supports the 1080/24p display;
2.Player choose the 1080/24p option in the setup
menu;
3.Media must be the 1080/24p video.
Notes:
- This resolution becomes effective only when
the playing Blu-ray Disc™ contents are Film
source.
- During HDMI 1080/24p playback, there will
be no composite output.
[Video Process]
TV Video Adjust More...
Low
Video Process Sharpness
Display Setting
SETUP Exit
Move cursor key to select menu option
then use “OK ” key to select
• [Video Adjust]
Select a predefined setting of the video.
1. Press OK.
2. Press/ to adjust the video
Brightness, Contrast, Hue and
Saturation.
{Brightness} - Press / to adjust
the brightness of display, goes left
means dark and right means bright.
{Contrast} - Press / to adjust the
contrast of display, goes left means low
contrast and right means high contrast.
{Hue} - Press / to adjust the Hue of
display, goes left means low hue and
right means high hue.
{Saturation} - Press / to adjust
the saturation of display, goes left
means low Saturation and right means
high saturation.
3. Press RETURN to exit.
Brightness
Contrast
Hue
Saturation
RETURN Exit Change




• [Sharpness]
Select the level of sharpness: High,
Middle, Low.
{High} - Select High sharpness level.
{Middle} - Select Middle sharpness.
menu.
- Press SETUP to exit the menu.
[TV]
• [TV Screen]
Select the screen format according to
how you want the picture to appear on
the TV.
{16:9 Full} – For a disc with the aspect
ratio of 4:3, the output video is
stretched into 16:9 full screen.
{16:9 Normal} – For a disc with the
aspect ratio of 4:3, the output video is
resized vertically to match what will be
seen on the display.
{4:3 Pan&Scan} – For standard TV, it
displays a wide picture on the entire
screen and cuts off the redundant
portions.
{4:3 Letterbox} – For standard TV, it
displays a wide picture with two black
borders on the top and bottom of 4:3
screen.
• [Resolution]
Select a video output resolution that is
compatible with your TV display
capability.
{Auto} – Select the most suitable
resolution according to the TV.
{480i/576i}, {480p/576p}, {720p},
{1080i}, {1080p}
– Select a video resolution setting that
is best supported by the TV . See TV
manual for details.
• [Color Space]
Select a predefined Colour space of
picture.
{RGB} – Select RGB Colour space.
{YCbCr} – Select YCbCr Colour space.
{YCbCr422} – Select YCbCr422 Colour
space.
{Full RGB} – Select Full RGB Colour
space.
• [HDMI Deep Color]
This feature is available only when the
display device is connected by a HDMI
cable, and when it supports Deep
Colour feature.
{30 bits} – Output 30 bits Colour.
{36 bits} – Output 36 bits Colour.
{Off} – Output standard 24 bits Colour.
Note:
- When the colour space is "YCbCr422", even if
HDMI Deep Color is set to 30bits/36bits, it is not
output with Deep Colour.
• [HDMI 1080
/24p]
{On} – Enable 1080/24p video