Toshiba WT8-A User Manual

Page 49

Advertising
background image

To connect a USB Flash Memory to the Micro-USB port, you must
purchase a suitable Micro USB to USB Converter Cable.
USB Flash Memory will be formatted and all the data in the USB Flash
Memory will be lost when proceeding.

1.

Turn on your tablet and allow it to load the Windows operating system
as normal.

2.

Insert the USB Flash Memory into Micro-USB port on your tablet by
using the Micro USB to USB Converter Cable.

3.

Tap Control Panel under Windows System in Apps view.

4.

Tap System and Security -> Action Center -> Recovery -> Create
a recovery drive
.

5.

Follow the on-screen instructions to finish creating the Recovery
Media.

Restoring the pre-installed software from your created

Recovery Media

If the pre-installed files are damaged, you are able to use the Recovery
Media you have created to restore the computer to the state it was in when
you originally received it. To perform this restoration, follow the steps
below:

When you reinstall the Windows operating system, the storage space
may be reformatted and all data may be lost.
Please make sure to use the default Boot Mode option in the BIOS
setup utility before restoring.
1. Launch the BIOS setup utility.
Please refer to

TOSHIBA Setup Utility

section for further information.

In the BIOS setup screen, select Boot -> Boot Type -> UEFI Boot
Type
(Default).
If you create a recovery image using advanced recovery tools from
Control Panel, please also make sure to use the default Boot Mode
option (UEFI Boot) in the BIOS setup utility before restoring.

1.

Insert the USB Flash Memory into Micro-USB port on your tablet by
using the Micro USB to USB Converter Cable.

2.

In the Settings charm, tap Power and then select Shut down.

3.

After completely shut down the tablet, wait for about 10 seconds. Then
hold down the Power button and Volume up button simultaneously
until the Boot menu is loaded.

4.

Use the Volume up and the Volume down button to select the
appropriate option from the menu according to your actual recovery
media and press the Windows button to confirm the selection.

User's Manual

5-4

Advertising