Toshiba SD1010 - Manual (Page 16)


E
ng
lis
h
Zooming In
This function allows you to enlarge the picture on the
TV screen and to pan through the enlarged picture.
A
During playback, press ZOOM repeatedly to display
the picture with different scales.
 Use /// to pan through the enlarged picture.
 Playback will continue.
B
Press ZOOM repeatedly to return to the original size.
Slow Motion
A
Press SLOW during playback to select the required
speed: 1/2, 1/4, 1/8( forward only ).
 Sound will be muted.
B
To return to normal speed, press PLAY/ PAUSE .
Forward/ Reverse Searching
You can fast forward or fast reverse a disc during
playback and select a desired search speed.
For DVD,VCD, SVCD,CD, MP3
A
During playback, press F.R/ F.F to select the required
speed: X2, X8, X30, X100(backward or forward).
 Sound will be muted (DVD/VCD/SVCD/MP3) or
intermittent (CD).
B
To return to normal speed, press PLAY / PAUSE .
Selecting various repeat functions
Repeat play mode
The repeat play options vary depending on the disc
type.
A
While playing a disc, press REPEAT repeatedly to
choose a repeat option.
For DVD
-Repeat Chapter (currently playing chapter)
-Repeat Title (currently playing title)
-Off (cancel)
For Video CD, Audio CD
-Repeat Single (currently playing track)
-Repeat All (entire disc)
-Off (cancel)
For MP3, JPEG
-Repeat Single (currently playing file)
-Repeat All (current folder)
-Off (cancel)
Tip:
-For VCD2.0/SVCD discs, repeat playback is not
possible if the PBC mode is turned on.
Repeating a section within a title/track
You can repeat the playback of a specific segment
within a title or track. To do this, you must mark the
start and end of the segment you want.
A
While playing a disc, press A - B at your chosen
starting point.
B
Press A - B again at your chosen end point.
 The section will now repeat continuously.
C
To exit the sequence, press A - B.
Viewing the disc playback Information
You can view the disc information (such as current
title/chapter/track number, total playing time or
remaining time on the disc) without interrupting the
disc playback.
A
During playback, press DISPLAY repeatedly on the
remote control.
 The available disc information appears on the TV
screen with the following sequence.
DVD Video
(DVD)
Time
Time 00：03：33/01：24：46
(DVD)
Title
Title 1/1
(DVD)
Chapter
Chapter 2/8
(DVD)
Audio
Audio 1/1 D 5.1Ch Eng (DVD)
Subtitle
Subtitle 1/8 Eng (DVD)
Angle
Angle 1/4 (DVD)
VCD2.0
(VCD)
Time
Time 00：03：33/00：05：00
(VCD)
Track
Track 3/24 (VCD PBC OFF)
OR
Time
Time 00：03：33/00：05：00
(VCD PBC ON)
PBC On (VCD PBC ON)
Title/Chapter/Track/Time selection
A
Press T-SEARCH, then press / to select
{ Time }, { Title }, { Chapter } or { Track }.
For VCD：
PBC OFF
Track ---
Time --:--:-- (desired time of the current track)
Disc Time --:--:-- (desired time of the disc)
For DVD:
Title ---
Chapter ---
Time --:--:-- (desired time of the disc)
B
Use the number buttons ( 0-9 ) to input a valid
number or time("0" cannot be input as the first
number). (This function only apply to DVD/VCD/CD/
SVCD.)
C
Press OK to confirm.
 The playback skips to the selected title/chapter/
track/time.
Angle
 When {Angle} information appears on the screen,
press ANGLE button on the remote control
repeatedly to switch between different angles.
 Playback will go to the selected angle.
Playback Feature
Helpful hint： The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.