Toshiba DVR80 - Manual (Page 36)

36 EN
• If there is a power failure or the unit is unplugged for more
than 30 seconds, the clock setting and all timer settings will
be lost.
• If there is no disc or an unrecordable disc in the tray
(finalised DVD-RW/-R, finalised DVD+R, a fully recorded
disc, etc.), the DVD on the front panel display will flash and
the timer recording will not occur. Insert a recordable disc.
• If there is no tape or a tape with a record tab is not in the
cassette compartment, the VCR on the front panel display
will flash and the timer recording cannot be performed.
Please insert a recordable tape.
• After all timer recordings have completed, if you want to play
back or eject the recorded disc, press [TIMER SET], and
then press [PLAY B] or [OPEN
\CLOSE A].
• The timer recording cannot be performed in DVD and VHS
at the same time. If you set two programmings with the same
channel and time both in DVD and VHS, the programming
that has priority will be recorded.
• You cannot make any DVD operation during DVD timer
recording.
• You cannot make any VHS operation during VHS timer
recording.
• Timer recording whose recording time exceeds 12 hours
cannot be made.
• When 2 or more programmes are overlapped, “Timer
programme overlapped” appears, and the overlapped
programme will be displayed in blue. To correct the timer
programme refer to “Checking, Cancelling or Correcting the
Timer Programming Information” on page 35.
• If the Start time is earlier and the End time is later than the
current time, the recording will start immediately after you
press [TIMER SET].
• If a videotape ends during the timer recording, the unit will
automatically stop, eject the videotape, and turn itself off. To
continue recording, insert a recordable tape.
Priority of overlapped settings
The unit records programmes according to priority if the timer
programmes overlap.
If the starting time is same:
• The timer programming set first (PROG. 1) has priority.
When the starting time and the ending time for each
programmes are different:
• A programme that has earlier start time has priority.
If the recording time is partially overlapped:
• The timer programming with the earlier start time (PROG. 2)
has priority. PROG. 1 will start after PROG. 2 recording is
complete.
If the recording time entirely overlaps:
• The shorter timer programming (PROG. 1) is not recorded.
Note for DVD recording
• If the recording time of two programmes are overlapped, or
the End time of a programme and the Start time of another is
same, the first 2 minutes (at the longest) of the subsequent
programme will be cut off.
If the End time of the programme currently being
recorded and the Start time of the subsequent
programme are same:
• If PROG. 1 is a DVD recorded programme, the beginning of
the PROG. 2 may be cut off.
* If the cut off time exceeds 3 minutes, the error number “E40”
will appear in “Timer Programming” list.
Notes for the Timer Recording
PROG. 2
recording will start
after PROG. 1
recording is
completed.
Actual
recording
The first 2 minutes (at the longest) will be cut off.
PROG. 2
PROG. 1
PROG. 1 PROG. 2
The first 2 minutes (at the longest) will be cut off.
PROG. 2
PROG. 1
PROG. 3
PROG. 1 PROG. 3 PRO
G. 2
Actual
recording
The first 2 minutes (at the longest) will be cut off.
Actual
recording
PROG. 2
PROG. 1
PROG. 2 PROG. 1
Actual
recording
PROG. 2
PROG. 1
PROG. 2
Actual
recording
The first 2 minutes (at the
longest) will be cut off.*
PROG. 2
PROG. 1
PROG. 2 PROG. 1
E9TK5FD_EN.book Page 36 Wednesday, January 13, 2010 10:33 AM