Toshiba BDX2400 - Manual (Page 9)

English
9
Connecting USB device
Connecting Power
1. Confi gure your player to access the wireless
access point or router.
2. The network confi guration and connection
method may vary depending on the equipment
in use and the network environment. Your
Blu-ray Disc™ player is equipped with an IEEE
802.11n wireless module, which also supports
the 802.11a/b/g/n standards. For the best
wireless performance, we recommend using an
IEEE 802.11n certifi ed Wi-Fi ® network (access
point or wireless router).
Your Blu-ray Disc™ player has an integrated Wi-Fi ®
device and antenna. No physical connection to the
wireless router is necessary.
The USB jack supports USB fl ash drive, TOSHIBA’s
USB Wi-Fi ® adapter (Model name: WLM-12EB1)
and 4 ports USB HUB.
A USB fl ash drive provides an additional memory
to software upgrade and enjoy BD-Live TM bonus
content.
You can also enjoy playing back MP3/JPEG/MPEG4/
DivX ® fi les stored in the USB fl ash drive.
Connect the AC power cable to the wall socket.
• The product is ready to be set up for use.
Connect the USB fl ash drive or TOSHIBA’s USB
Wi-Fi ® adapter to the USB jack on this product.
Notes:
• To enjoy BD-Live™ bonus content, as your local
storage, use a 1 GB or larger USB fl ash drive.
• For some Blu-ray TM discs with BD-Live TM feature, you
may need to plug in the USB fl ash drive before loading
the disc. Otherwise, the disc may not playback.
• TOSHIBA does not guarantee 100% compati bility with
all USB fl ash drives.
• USB-HUB is used when using USB fl ash drive and
TOSHIBA’s USB Wi-Fi® adapter together.
Notes:
• You must use a wireless IP sharer that supports
IEEE 802.11a/b/g/n. (n is recommended for stable
operati on of the wireless network.)
• Wireless LAN, in its nature, may cause interference,
depending on the use conditi on (AP performance,
distance, obstacle, interference by other radio devices,
etc.).
• Set the wireless IP sharer to Infrastructure mode. Ad-
hoc mode is not supported.
• When applying the security key for the AP (wireless IP
sharer), only the following is supported.
1. Authenti cati on Mode: WPAPSK, WPA2PSK
2. Encrypti on Type: WEP, TKIP, AES
Notes:
• Before connecti ng the AC power cord, ensure you have
completed all other connecti ons.
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the
back of the unit.
• The type plate is located on the back of the unit.
• Connecting via the built-in Wi-Fi ® device
and a wireless access point or router (for
BDX3400SE model)
Wireless
access point
USB fl ash drive
Notes:
• USB Wi-Fi® adapter is required for a wireless
connecti on.
• This unit is compati ble with TOSHIBA’s USB Wi-Fi®
adapter only (Model name:WLM-12EB1).
• For detailed informati on, please refer to the device’s
User’s Guide for WLM-12EB1.