Toshiba SD4015 - Manual (Page 25)

25
Function setup
Using the TV System setup menu
Initialization
This option allows you to return the unit’s setting to the factory
default. Any changes you have made to the unit’s settings will
be reverted back to the original setting except your password
and parental lock level.
Note
When you reset the DVD player to the factory default, the
DVD player will take 3-5 seconds to reset.
1. Press SETUP during stop.
2. Press button to select TV System.
3. Press / button to select the setting item: Initialization,
View DivX(R) VOD, Screen Saver, HDMI CEC or TV
System.
4. Press button, then use / button to select the setting
choice on the right.
5. Press ENTER button.
6. Press SETUP button to exit the menu.
TV System
Initialization
View DivX(R) VOD
Screen Saver
HDMI CEC
TV System
Parental Lock DVD
DVDs equipped with the password function are rated
according to their content. The contents allowed by a
parental lock level and the way a DVD can be controlled
may vary from disc to disc.
For example, if the disc allowed, you could edit out violent
scenes unsuitable for children and replace them with more
suitable scenes, or you could lock out playback of the disc
altogether.
If you forget your password at this moment, you cannot
use the super password (8888). You need to go to the
Parental Lock setup menu to reset and input a new
password.
The parental lock levels are equivalent to the following
ratings.
Level 1 : Kid Safe
Level 2 : G
Level 3 : PG
Level 4 : PG-13
Level 5 : PG-R
Level 6 : R
Level 7 : NC-17
Level 8 : Adult
• DVDs may or may not respond to the parental lock settings.
This is not a defect in the DVD player. Make sure this
function works with your DVDs.
• Parental lock level cannot be changed when the Parental
lock is active.
1. Press SETUP during stop.
2. Press button to select Parental Lock.
3. Press / button to select the setting option: Password
or Parental Lock.
Password
Press / button to select the Password option, then press
button. Enter your 4-digit security code and then press the
ENTER button.
DVD
Parental Lock
Password
Parental Lock
If you forget the password, you can erase your current
password by pressing number button 8 on the remote
control four times, then press ENTER button to confi rm
the setting. (PASSWORD: 8888)
The Parental lock
is active. The Parental lock is
NOT active.
Using the Parental Lock setup menu
1) Press / button to select the Parental Lock option,
then press button.
2) Press / button to select parental lock level and then
press the ENTER button.
3) Press / button to select the Password option, then
press button. Enter your 4-digit security code and then
press the ENTER button.
You cannot play DVD discs rated higher than the level
you selected unless you cancel the parental lock
function and enter the 4-digit security code. Then
press ENTER to confi rm the password.