External monitor, Connecting the monitor cable – Toshiba Portege M750 User Manual
Page 90

3-40
User’s Manual
PORTÉGÉ M750
3. Close the lid and slide the lock to the lock position.
Figure 3-24 Closing the lid
For details on inserting the Ultra Slim Bay HDD Adaptor II in the computer’s
Ultra Slim Bay slot, refer to Chapter 4,
External monitor
An external analog monitor can be connected to the external monitor port
on the computer.
Connecting the monitor cable
To connect a monitor, follow the steps as detailed below:
1. Turn the computer’s power off.
2. Connect the monitor cable to the external monitor port and tighten the
screws on the left and right hand side of the connector as required.
Figure 3-25 Connecting the monitor cable to the external monitor port
3. Turn the external monitor’s power on.
4. Turn the computer’s power on.
Lid
External monitor port
Monitor cable