Toshiba RD100 - Manual (Page 72)

72 EN
Power off:
When you turn the TV off, this unit and all equipment
connected via an HDMI cable will automatically be turned
off except during recording on the unit.
Receiving operational signal from TV’s remote
control:
You can operate this unit with TV’s remote control. Check
your TV owner’s manual for details.
Note
• This function may not work properly depending on the
connected TV.
• The available operation may differ depending on the
TV’s remote control you use.
• For the one touch play, [DISC MENU] may not work
depending on the disc in this unit.
• Other components must be compatible with HDMI-CEC
in order to use this function.
Setup A General Setting A DVB Setting
You can make settings of the digital tuner from the DVB
Setting.
You can set “Adult Lock” to “ON” or “OFF” and also
change Pincode.
1 Select “ON” or “OFF” using [ K
\ L ], then
press [ENTER
\
OK].
1) Enter your desired Pincode using
[the Number buttons], then press [ENTER \ OK].
2) For confirmation, enter the Pincode again using
[the Number buttons] then press [ENTER \ OK].
Enter the Pincode using [the Number buttons].
• While entering the Pincode, use [
0 ] or [CLEAR] to
clear the numbers once entered.
Note
• Once “Adult Lock” has been set to “ON”, Pincode will be
required in order to view the locked channels or make
the timer recording of them, and when you try to execute
the “Auto Tuning” for DVB or “Edit Channels”.
• If you forget the Pincode, press [4], [7], [3], [7] to cancel
the Pincode.
Note
• The Audio and Subtitle setting may not be available for
some broadcast.
• To change the audio language, refer to “Multi Audio” on
page 26.
• To display the subtitle or choose the subtitle language,
refer to “Subtitle” on page 26.
You can check the current DVB system software version
of this unit.
Setup A General Setting A Reset All
Select “Yes” using [ K
\ L
], then press [ENTER
\
OK].
“Are you sure?” will appear. Select “Yes” using [ K
\ L ], and
then press [ENTER \ OK].
Note
• The settings listed below will remain unchanged even after
resetting to the factory default.
- Clock setting
- Channel setting
- Parental lock setting
- DivX
® VOD code
- Timer programmes
- DVB setting
System information
DVB Setting
A Adult Lock (Default: OFF)
DVB
2
To set “Adult Lock” to “ON”:
To set “Adult Lock” to “OFF”:
A
B
C
Adult Lock
Language
About
ON
OFF
Adult Lock
B Language
DVB
Audio : Set the Audio language.
Subtitle : Set the Subtitle language.
Data Service : Set the Digital Teletext language.
C About
DVB
Reset All
Language
Audio
Subtitle
Data Service
Reset to factory default?
Yes
No
E2TE0BD_EN.book Page 72 Friday, March 5, 2010 4:49 PM