Toshiba Qosmio E10 - Manual (Page 122)

User’s Manual 6-13
Power
Installing the battery pack
To install a battery, follow the steps below.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Attach the battery pack in a battery cover.
Attach the battery pack in a battery cover
4. Insert the battery pack with its cover into the computer.
Securing the battery pack
■ The battery pack is a lithium ion battery, which can explode if not
properly replaced, used, handled or disposed of. Dispose of the battery
as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
■ Do not touch the latch while holding the computer. Or you may get
injured by the dropped battery by unintentional release of the latch.
Battery pack
Battery cover
Battery pack