Nokia Bluetooth Headset BH-600 - Manual (Page 6)

ENGLISH
Charge the battery
The headset has an internal,
nonremovable, rechargeable battery.
Do not attempt to remove the battery
from the device, as you may damage
the device.
1. Connect the charger to a wall
outlet.
2. Connect the charger to the headset
(7). The indicator light is
continuously displayed during
charging. If charging does not
start, disconnect the charger, plug
it in again, and retry. Charging the
battery fully may take up to
2 hours.
3. When the battery is fully charged,
the indicator light turns off.
Disconnect the charger from the
headset and the wall outlet.
The fully charged battery has power
for up to 7 hours of talk-time or up to
220 hours of standby time. However,
the talk and standby times may vary
when used with different mobile
phones or other compatible Bluetooth
devices, usage settings, usage styles,
and environments.
When battery power is low, the
indicator light flashes fast.
Switch the headset on or off
To switch on, press and hold the
multifunction key until the indicator
light turns on and the headset beeps.
To switch off, press and hold the
multifunction key until the indicator
light rapidly flashes four times and
then turns off.
Pair the headset
1. When the headset is off, press and
hold the multifunction key until
the indicator light is continuously
displayed.
2. Switch on your compatible phone.